READ ALONGSIDE THE SOURCE

Okaloosa County BOCC — May 6, 2014 — FORM_62-346_900-11ERP applicationLongwood Park — reading text

Part 2 of 5. These parts divide the reading text for browsing; they are not the source document's page numbers.

Machine-extracted text — 74-FORM_62-346_900-11ERP applicationLongwood Park.pdf

Machine-extracted OCR text · Review label: Machine produced / unreviewed

Compare this copy with the preserved source. Review labels describe the recorded status of this file; they do not guarantee that the text is error-free. Spacing and line breaks are retained, with long lines wrapped to fit the screen.

general permits. This information is required in addition to that required in other sections of the application. Please submit five copies of this notice of receipt of application and all attachments with the other required information. Please submit all information on 8 1/2" x 11" paper. Project Name: Longwood Park Shoreline Restoration County: Okaloosa Owner: Okaloosa County Applicant: Alison McDowell/Choctawhatchee Basin Alliance Applicant's Address: 109 Greenway Trail, Santa Rosa Beach, FL 32459 1. Indicate the project boundaries on a USGS quadrangle map. Attach a location map showing the boundary of the proposed activity. The map should also contain a north arrow and a graphic scale; show Section(s), Township(s), and Range(s); and must be of sufficient detail to allow a person unfamiliar with the site to find it. 2. Provide the names of all wetlands, or other surface waters that would be dredged, filled, impounded, diverted, drained, or would receive discharge (either directly or indirectly), or would otherwise be impacted by the proposed activity, and specify if they are in an Outstanding Florida Water or Aquatic Preserve: Hand Cove, Choctawhatchee Bay 3. Attach a depiction (plan and section views), which clearly shows the works or other facilities proposed to be constructed. Use multiple sheets, if necessary. Use a scale sufficient to show the location and type of works. 4. Briefly describe the proposed project (such as "construct dock with boat shelter", "replace two existing culverts", "construct surface water management system to serve 150 acre residential development"): salt marsh intertidal habitat along 130’ of Longwood Park shoreline. 5. Specify the acreage of wetlands or other surface waters, if any, that are proposed to be filled, excavated, or otherwise disturbed or impacted by the proposed activity: Filled .008 acres; Excavated 0 acres; Other impacts 0 acres 6. Provide a brief statement describing any proposed mitigation for impacts to wetlands and other surface waters (attach additional sheets if necessary): NA FOR AGENCY USE ONLY Application Name: Application Number: Office where the application can be inspected: Note to Notice recipient: The information in this notice has been submitted by the applicant, and has not been verified by the agency. It may be incorrect, incomplete or may be subject to change. Form #62-346.900(1) – Joint Application for ERP/SSL Authorization/Federal D&F Permit in Northwest Florida Section B, Page 1 of 1 SECTION D PROJECT SPECIFIC INFORMATION FOR INDIVIDUAL PERMIT APPLICATIONS NOT RELATED TO AN INDIVIDUAL SINGLE-FAMILY DWELLING UNIT Please provide the information requested below if the proposed project requires an individual permit under Section 373.4145(1)(a), F.S., and Chapter 62-346, F.A.C. The information requested in Sections I and II below represents the level of information that is usually required to evaluate an application. However, because the level of information required for a specific project will vary depending on the nature of the proposed work and the characteristics and location of the site, the information requested herein is not necessarily all- inclusive. Additional information may be requested by the reviewing agency in order to complete your application. The burden of demonstrating compliance with the criteria for issuance of permit rests with the applicant. Therefore, providing a greater level of detail than requested may reduce the need to submit additional information at a later date. If an item does not apply to your project, indicate “Not Applicable” or “N/A,” and proceed to the next item. Please provide, describe, or identify the following: I. Site Information: A. A vicinity map including all relevant road names. B. Recent aerials, legible for photo interpretation with a scale of 1 inch = 400 feet, or more detailed, with project boundaries delineated on the aerial. C. A map or maps of the project area and vicinity delineating USDA/NRCS soil types. D. The seasonal high water or mean high tide elevation and normal pool or mean low tide elevation for each on site wetland or surface water, including receiving waters into which runoff will be discharged. Include dates, datum, and methods used to determine these elevations. E. The seasonal high ground water tables at the locations representative of the project area. Include dates, datum, and methods used to determine these elevations. F. A copy of the County plat map showing all land and acreage owned or controlled by the applicant contiguous to the project. II. Environmental Considerations A. A description of all proposed activities involving dredging, filling, or construction in, on, or over wetlands or other surface waters (see Chapter 62-340, F.A.C.) within the project boundary.-- B. Impact Summary Tables: 1. For all projects, complete Tables 1, 2, and 3, as applicable. 2. For docking facilities or other structures constructed over wetlands or other surface waters, provide the information requested in Table 4. 3. For shoreline stabilization projects, provide the information requested in Table 5. C. A description of how water quantity, quality, hydroperiod, and habitat will be maintained in any wetlands or other surface waters within and immediately adjacent to the project area. There will be no impact to the hydroperiod and water Form #62-346.900(1) – Joint Application for ERP/SSL Authorization/Federal D&F Permit in Northwest Florida, Section D, Page 1 of 11 quantity. Potential temporary impacts to water quality (turbidity) will be controlled by turbidity curtain. All work will be performed from the uplands. No boats will be used. D. A discussion of how the boundaries of any wetlands or other surface waters of the state within the project area were determined, including: documentation of any jurisdictional declaratory statement, formal wetland determination, formal determination, validated informal determination, or revalidated jurisdictional determination that may have been performed. Please provide the identifying agency file numbers. E. A brief narrative identifying all receiving waters, and their classification (i.e. Class I, II, or III, if known), including Outstanding Florida Waters [(OFW) —(see Chapter 62-302, F.A.C., for waterbody classifications and OFW designations)] and Aquatic Preserve (see Chapter 18-20, F.A.C., May 27, 1999), and whether the waterbody is on the Department’s approved verified list under Section 403.067(4), F.S. (See: lists of verified impaired waters at: http://www.dep.state.fl.us/water/tmdl/amended_gp1.htm, http://www.dep.state.fl.us/water/tmdl/adopted_gp2.htm, http://www.dep.state.fl.us/water/tmdl/adopted_gp3.htm, http://www.dep.state.fl.us/water/tmdl/adopted_gp4.htm, Choctawhatchee Bay is a Class II waterbody F. Results of any wildlife surveys that have been conducted on the site, and provide any comments pertaining to the project from the Florida Game and Fresh Water Fish Commission and the U.S. Fish and Wildlife Service. G. A narrative description of any proposed mitigation plans, including purpose, maintenance, monitoring, and construction sequence and techniques, and estimated costs. III. Plans Clear, detailed plans for the system including specifications, plan (overhead) views, cross sections (with the locations of the cross sections shown on the corresponding plan view), and profile (longitudinal) views of the proposed project. The plans must be signed and sealed by a registered professional, as defined in subsection 62-346.030, F.A.C. Plans must include a scale and a North arrow. These plans should show the following: A. Project area boundary and total land area, including distances and orientation from roads and other land marks. B. Existing land use and land cover (acreage and percentages), and on-site natural communities, including wetlands and other surface waters, aquatic communities, and uplands. Use the Florida Land Use Cover & Classification System (FLUCCS)(Level 3). Identify each community with a unique identification number which must be consistent in all exhibits. C. The existing topography extending at least 100 feet off the project area, and including adjacent wetlands and other surface waters. All topography shall include the location and a description of known benchmarks, referenced to NGVD or NAVD. D. If the project is in the known flood plain of a stream or other water course, identify the 10-year flood and 100-year flood elevations and floodplain boundaries. E. The boundaries of wetlands and other surface waters within the project area. Distinguish those wetlands and other surface waters that have been delineated by any binding jurisdictional determination. F. Proposed land use, land cover and natural communities (acreage and percentages), including wetlands and other surface waters, undisturbed uplands, aquatic communities, impervious surfaces, and water management areas. G. Proposed impacts to wetlands and other surface waters, and any proposed connections/outfalls to other wetlands and other surface H. Proposed buffer zones and their intended uses. Form #62-346.900(1) – Joint Application for ERP/SSL Authorization/Federal D&F Permit in Northwest Florida, Section D, Page 2 of 11 I. Pre- and post-development drainage patterns and basin boundaries, including original and final contours, showing the direction of flows, including any off-site runoff being routed through or around the system; and connections between wetlands and other surface waters. J. Location of all water management areas with details of size, side slopes, and designed water depths. K. Location and details of all water control structures, control elevations, any seasonal water level regulation schedules; and the location and description of benchmarks (minimum of one benchmark per structure). L. Location, dimensions and elevations of all proposed and existing structures, including utility lines, roads, building (including finished floor elevations), docks, seawalls, and roads. M. Location and size of the internal water management facilities including planting plan for littoral zones (if applicable). N. Rights-of-way and easements

Download this text file with its original spacing ↓