READ ALONGSIDE THE SOURCE
Fort Walton Beach — 2025 Consumer Water Quality Report — reading text
Part 2 of 3. These parts divide the reading text for browsing; they are not the source document's page numbers.
Machine-extracted text — ADID-147.pdf
Machine-extracted OCR text · Review label: Machine produced / unreviewed
Compare this copy with the preserved source. Review labels describe the recorded status of this file; they do not guarantee that the text is error-free. Spacing and line breaks are retained, with long lines wrapped to fit the screen.
a very high
Field office located at 7 Hollywood Blvd. NW. You may Food and Drug Administration (FDA) regulations establish limits
request a copy of lead testing results by calling 850-833-9613. quality water source. With the excellent water quality of
for contaminants in bottled water, which must provide the same
protection for public health. the Floridan Aquifer, the only treatments required to meet
The City conducted a detailed service line inventory which Federal and State standards are aeration and
included inspecting every service connection within our system Drinking water, including bottled water, may reasonably be
chlorination.
during our meter replacement project. No lead, galvanized expected to contain at least small amounts of some contaminants.
requiring replacement, or lead status unknown service lines The presence of contaminants does not necessarily indicate that
were identified during the inventory. Detailed records are on the water poses a health risk. More information about
file at the Utilities Field office located at 7 Hollywood Blvd. NW. contaminants and potential health effects can be obtained by
You may request a copy of the inspection records associated calling the Environmental Protection Agency’s Safe Drinking
with any address by calling 850-833-9613. Water Hotline at (800-426-4791).
2025 WATER TESTING RESULTS In the table to the left you will find many terms and
abbreviations, some of which you might not be
INORGANIC CONTAMINANTS
familiar. To help you better understand these terms,
Dates of MCL
Contaminant and Unit of
sampling Violation
Level Range of
MCLG MCL Likely Source of Contamination
we have provided the following definitions:
Measurement Detected Results n/a: not applicable
(mo./yr.) (Yes/No)
Discharge of drilling wastes; discharge from metal refineries; ND: means not detected and indicates that the substance was not found
Barium (ppm) April 2023 No 0.35 0.0038-0.35 2 2 by laboratory analysis.
erosion of natural deposits
Erosion of natural deposits; discharge from fertilizer and aluminum Parts per million (ppm) or milligrams per liter (mg/l): one part by
Fluoride (ppm) April 2023 No 0.94 0.46-0.94 4 5 factories. Water additive which promotes strong teeth when at the weight of analyte to one million parts by weight of the water sample.
optimum level of 0.7 ppm The City does not add additional fluoride. Parts per billion (ppb) or micrograms per liter (µg/l): one part by
Runoff from fertilizer use; leaching from septic tanks, sewage; weight of analyte to one billion parts by weight of the water sample.
Nitrate(as Nitrogen) (ppm) April 2025 No 0.30 ND – 0.30 10 10
erosion of natural deposits. Picocuries per liter (pCi/L): measure of the radioactivity in water.
Sodium (ppm) April 2023 No 120 43-120 n/a 160 Saltwater intrusion, leaching from soil Action Level (AL): the concentration of a contaminant which, if
STAGE 2 DISINFECTANTS AND DISINFECTION BY-PRODUCTS * . exceeded, triggers treatment or other requirements which a water
MCL or system must follow.
Disinfectant or Dates of
MRDL Level Range of MCLG or MCL or Maximum Contaminant Level or MCL: the highest level of a
Contaminant and Unit of sampling Likely Source of Contamination
Violation Detected Results MRDLG MRDL contaminant that is allowed in drinking water. MCLs are set as close
Measurement (mo./yr.)
(Yes/No) to the MCLGs as feasible using the best available treatment
Jan-Dec technology.
Chlorine (ppm) Stage 1 No 1.19 0.97-1.34 MRDLG = 4 MRDL = 4.0 Water additive used to control microbes
2025 Maximum Contaminant Level Goal or MCLG: the level of a
Haloacetic Acids (five) July 2025 - contaminant in drinking water below which there is no known or
No 1.38-9.46 n/a MCL = 60 By-product of drinking water disinfection expected risk to health. MCLGs allow for a margin of safety.
(HAA5) (ppb) Oct 2025
TTHM (Total July 2025 – Maximum residual disinfectant level or MRDL: the highest level
No 5.2-110.18 n/a MCL = 80 By-product of drinking water disinfection of a disinfectant allowed in drinking water. There is convincing
trihalomethanes) (ppb) Oct 2025
MICROBIOLOGICAL CONTAMINANTS** evidence that addition of a disinfectant is necessary for control of
microbial contaminants.
Contaminant and Unit of Dates of MCL Total Number of Positive
MCL or MRDL Likely Source of Contamination Maximum residual disinfectant level goal or MRDLG: the level of
Measurement sampling Violation Samples
a drinking water disinfectant below which there is no known or
Jan - Dec
E. coli No 1** Detected, but no MCL violation Human and animal fecal waste expected risk to health. MRDLGs do not reflect the benefits of the use
2025
of disinfectants to control microbial contaminants.
___________________________________________________________________
LEAD AND COPPER (TAP WATER) * During 2025, our system was sampling Total Trihalomethanes
Dates of AL 90th No. (TTHMs) and Haloacetic Acids (HAA5s) on a quarterly basis due to a
Contaminant and Unit of Range of Tap AL (Action sample result that exceeded the MCL in a previous quarter. It was later
Sampling Exceeded Percentile Exceeding MCGL Likely Source of Contamination
Measurement Sample Results Level)
