Okaloosa County BOCC — March 4, 2014 — Repair & Paint Countryview & Bluewater Tanks — reading text

Effects." g. Paints which contain more than 0.06% by weight of lead (or any lead compounds) shall not be used. The CONTRACTOR shall submit documentation from the coating manufacturer stating that their paints are in compliance with this requirement in addition to other requirements of these Specifications. h. Where the foregoing standards, recommendations and specifications are conflicting, the ENGINEER shall be notified of the conflicts. Manufacturer's published product data shall be adhered to unless changed in writing by the manufacturer. 3. Other a. ANSI Z49.1, "Safety in Welding and Cutting" b. OSHA Regulations, 29 CFR 1910.146: Permit - Required confined spaces c. AWWA C652-92, Disinfection of Water Storage Facilities d. SSPC Guide 6, Guide for Containing Debris Generated During Paint Removal Operations 1.6 SUPERVISOR A. The CONTRACTOR shall provide a competent superintendent, satisfactory to the OWNER, for the Work at all times during working hours with full authority to act for him/her. B. The CONTRACTOR shall also provide an adequate staff for the proper coordination and expedition of his/her Work. Should, in the opinion of the OWNER, any language barrier exist between the on-site superintendent and the OWNER or ENGINEER, the CONTRACTOR shall employ a qualified full-time interpreter or provide a new on-site superintendent at no additional cost to the OWNER. 1.7 SAFETY REQUIREMENTS A. The CONTRACTOR shall comply with all applicable requirements of the Occupational Safety and Health Act of 1970 (Public Law 91-596) and will hold the OWNER and ENGINEER harmless from any civil or criminal penalties imposed as a result of the CONTRACTOR'S noncompliance with such requirements. No additional compensations for changes in the laws, regulations, or the interpretation thereof shall be granted by the OWNER. B. The CONTRACTOR shall comply with and have documented Confined Entry Space Repair & Paint 009870 - 3 Countryview & Bluewater Tanks (2014) Job No. 41-459  Procedures available at the tank site at all times as required by OSHA 29 CFR 1910.146. The CONTRACTOR shall also comply with any state and/or local requirements which are more restrictive than the federal requirements. C. The CONTRACTOR shall provide adequate worker protection when welding and flame cutting as required by ANSI Z49.1, “Safety in Welding and Cutting”. All rigging attachments present on the tank shall be carefully evaluated by the CONTRACTOR immediately prior to use for the type and magnitude of loads which CONTRACTOR intends to impose on them. The CONTRACTOR assumes all responsibility for use of any existing or added attachments. 1.8 WASTE DISPOSAL A. Waste material generated by abrasive blasting operations is a solid waste and shall be handled in the following order: 1. Contained 2. Collected 3. Stored 4. Evaluated 5. Properly disposed B. Compliance with local, state, and federal regulations concerning emissions, transportation or disposal of solid, particulate, liquid, or gaseous matter as a result of the cleaning, painting, or other operations under this Agreement shall be the responsibility of the CONTRACTOR. This compliance shall be accomplished without supervision from the OWNER, ENGINEER, or other direct or indirect agents of the OWNER. No additional compensations for changes in the laws, regulations, or other interpretation thereof shall be granted by the OWNER. C. No burning of trash (including abrasive bags or other paper or wood products) on the site shall be permitted. D. All shielding, abrasive retrieval, or other methods of using precautions required by the regulating agencies shall also be accomplished at no additional cost to the OWNER unless otherwise provided herein. Any fines imposed on the OWNER or ENGINEER by any regulatory agency as a result of the CONTRACTOR'S noncompliance with environmental or nuisance regulations shall be paid or reimbursed by the CONTRACTOR. E. Debris Collection: 1. All debris collected by this operation, removed from equipment or filters, or that has fallen to the ground shall be collected and stored at the tank site for testing, Repair & Paint 009870 - 4 Countryview & Bluewater Tanks (2014) Job No. 41-459  evaluation and ultimate disposal. 1. A centralized cleaning station for recyclable steel grit shall be set up at a location mutually agreed upon by the OWNER, CONTRACTOR and ENGINEER. 2. Storage for debris shall be in covered steel containers. Containers shall be parked, secured and stored on wooden 6" x 6" timbers so containers are NOT in contact with the ground. 3. Chain of Custody: a. Follow all local, state and federal regulations b. A Chain of Custody Form must accompany all composite samples. Included in this document shall be the name of the person taking the sample, the Company for which he works, the date and time which the sample was taken, the tank from which it was taken, the Township and Municipality where the tank is located and signatures of all persons involved in the Chain of Custody, including dates possessed and relinquished. F. Hazardous Waste - Sampling and Testing: 1. The Contractor shall hire a Florida state licensed disposal company to collect at least four (4) random representative samples of the paint debris from each container in accordance with USEPA and/or local regulations in the presence of the Engineer and the Contractor. a. Each separate sample shall contain at least 100 grams (approximately one cup) and shall be transported to an approved testing laboratory in accordance with all laws and regulations. The purpose of gathering these samples is to perform on each sample all necessary testing, such as Toxicity Characteristic Leaching Procedure Testing (TCLP Testing), or subsequent testing required by the Resource Conservation and Recovery Act (RCRA) or local and state regulations, to determine proper treatment and/or disposal requirements. b. All testing required by regulations or by the selected waste hauler or landfill, including any follow-up testing and the collection of the samples, shall be done at the Contractor’s expense. c. The number of samples from each container will be determined by the degree of variation of the results of the four (4) initial samples. d. Copies of all manifests, testing results and treatment procedure documents shall be sent to the Engineer and Owner. e. Should the results of the random testing of the contents of a container determine that the removed paint material does not constitute a hazardous material, the material shall be legally disposed of by the Contractor in accordance with local, state and federal laws. f. The Contractor shall be responsible for removing and properly transporting all the material from the project site. The material shall be transported in containers approved by the USEPA and local, state and federal regulations. g. The contract Base Bid shall include the cost of the transporting of the removed paint material to a non-hazardous waste landfill or other stipulated landfill and any disposal costs at that facility. Repair & Paint 009870 - 5 Countryview & Bluewater Tanks (2014) Job No. 41-459  h. Should the results of the random testing of the contents of a container determine that the removed paint material does in fact constitute a hazardous material, the material must either be: 1) treated by an approved method to reduce the leachable concentration levels to below the regulatory limits and disposed of in accordance with all local and/or state regulations; or 2) recycled and used as a raw material in a product approved by the appropriate regulatory agencies; and disposed of in a hazardous waste landfill. Disposal, treatment or recycling of the material shall be in strict accordance with the federal, state and local laws including, but not limited to RCRA, Toxic Substance Control Act (TSCA), Hazardous Materials Transportation Act (HMTA), USEPA and Florida Department of Environmental Protection (FDEP) regulations. i. All costs associated with the recycling, or treatment or disposal in an approved recycling or hazardous waste facility shall be paid for by the Owner. The hauler shall obtain the necessary insurance and the necessary permits for transportation and shall provide evidence of such to the Engineer and Owner. j. If the sample material obtained and tested as described above is determined to be a hazardous material according to the TCLP testing or subsequent testing required by RCRA, the Contractor shall delete the standard disposal for the removed paint residue from the Base Bid. 1) Included under this item is the furnishing of all materials, equipment, tools, utilities, labor, and supervision necessary for the completion of the work contained in this item in accordance with the drawings and specifications. The item generally includes the recycling, or treatment and transporting and deposition of all hazardous removed paint material in an approved recycling facility or disposal site, including obtaining all the necessary insurance and the necessary permits for transportation and providing evidence of such to the Engineer and Owner. 2) Transportation: a) All material classified as hazardous, as determined by the aforementioned