Fort Walton Beach Ordinance — 1877--dissolves boa — reading text

property line, right -of w - ay line, and edge of pavement, and the location of the clear visibility area as established in Section 6. 03. 00. 4. A summary table listing location, type, and area of any existing and proposed signs with fully dimensioned elevation drawing of any proposed sign, showing sign type, height and copy area; and, for facade signs, an elevation of the building, showing placement of any sign. H. Details for the construction of improvements, in compliance with the requirements set forth in the Engineering Standards Manual of Fort Walton Beach. 9. 02. 05 Submittal Requirements for Site Development Plans A. In addition to the information required in Sections 9. 02. 02, 9. 02. 03, and 9. 02. 04, all applications for site development plan approval shall contain the following information regarding existing and proposed development and supporting infrastructure: 1. The location of existing and proposed access points, driveway design, roads and rights -of -way, street intersections, sidewalks and other pedestrian facilities, bicycle facilities, and other paved areas within the boundaries of the property. 2. The location and use of any existing and proposed principal or accessory buildings and structures, showing proposed setbacks, building floor area, building heights, and other dimensional requirements of the zoning district in which the property is located. 3. The existing ground elevations, existing finished floor elevations, and proposed finished floor elevations for all buildings. 4. Information to demonstrate compliance with site development standards applicable within the zoning district and applicable to any specific uses subject to supplemental standards. 5. Information to demonstrate compliance with site development standards applicable to accessory uses and structures. B. Developments proposed with bonus provisions, as described in Chapter 4, shall provide the Bonus Scorecard with the site development plan application. 9. 02. 06 Submittal Requirements for Subdivision Plats A. At the discretion of the City, and identified at the pre -application conference, the dministralise Procedure, page 9 - I6  F13 .1. 0 I wW Devel uu urem ( bde Yaaon Bradt preliminary and final subdivision plats may be combined. Where the application is for a replat, the preliminary plat may be waived. B. In addition to the information required in Sections 9. 02. 02, 9. 02. 03, and 9. 02.04, all a applications for preliminary subdivision plat approval, including proposed townhouse developments and proposed zero lot line developments, shall contain the following o information: w 1. The proposed name of the subdivision. 2. Development specifications for the tract: land area and the proposed number and N layout of lots and blocks. 0 3. Location of land to be dedicated or reserved for public use for rights -of w - ay, streets, sidewalks, bike trails, pedestrian trails, easements, schools, parks, open rr spaces, or other public uses. 2 4. The substance of covenants, grants, easements, or other restrictions which may be imposed upon the use of land, buildings, and structures. 1- C. Receipt of the signed copy of the approved preliminary plat is authorization for the a applicant to proceed with the preparation of plans and specifications for minimum aA improvements and with the preparation of the final plat. 0m 1. Prior to the construction of any improvement required, or the submission of a bond in lieu of construction, the applicant shall provide documentation to 0 demonstrate compliance with the site improvement standards set forth in the Engineering Standards Manual ofFort Walton Beach. 0 2. All proposed construction shall be compatible with the soil conditions specific to the site. If necessary, the applicant shall provide boring and soils tests that shall be conducted by testing facilities licensed by the State. v D. The final plat shall conform substantially to the approved preliminary plat. The m E applicant may submit a final plat for a portion of the approved preliminary plat proposed to be recorded and developed at the time. 1. The applicant shall submit the original mylar after all reviews and revisions or m other reproducible drawing of the final plat as prescribed by Chapter 177, F.S., W duly signed as required. Review copies of the final plat may be submitted for comment on bond paper. The number and size of review copies shall be specified by the Development Administrator. The final plat submitted for recording shall be composed of individual sheets of the sine approved by the County for purposes E a of recording. a 2. The plat shall be tied to state plane coordinates. State plane coordinate ( Nort h E American Datum 1983/ 90 or subsequent NGS adjustments) in U. S. survey feet shall be stated on the final plat mylar submitted for recording. State plane Fm rn coordinates for at least two boundary corners of the proposed plat shall be shown. These coordinates shall be derived from field measurements in conformity with State law. r 3. In addition to the information required by Sections 177. 041- 177. 091, F.S., the following shall be shown on the plat: d E a. A location sketch showing the location of the subdivision with respect to section or City Limit lot lines. b. The exact names, locations, and right -of w - ay widths along the property lines of all existing or recorded streets intersecting or paralleling the boundaries of Administrative Procedures Paye9- 17 Packet! 242  F13 .1. c Land Dry F,,, t V1 anon ncadl the tract. c. Lots numbered in numerical order, beginning with number one in each block, and blocks lettered in alphabetical order. d. Common areas or other sites required for stormwater management areas or other shared facilities, adequate to accommodate all subdivision land development activities. e. Acknowledgment of the owners and all lien holders to the plat and restrictions, including dedication to public use of all streets, alleys, parks, or other open spaces shown thereon and the granting of the required easements. f. Space and forms for the following necessary signatures indicating approval, as listed below: 1) City Clerk' s recording certificate; 2) City Council approval; 3) Title certification; 4) Certificate of surveyor and mapper; 5) Dedication with certificate of ownership and acknowledgements; 6) Joinder and consent to dedication with acknowledgements; 7) Certificate by tax collector; 8) City engineer; and 9) City surveyor. C. Proposed zero lot line development shall include both a preliminary and final plat, and shall include a site development plan that demonstrates compliance with the site development standards set forth in Section 4. 07.05. D. A replat of an existing subdivision shall follow the same process as outlined for a new plat, except that a preliminary plat may not be required. The need for a preliminary plat shall be determined at the pre -application conference. 9. 02. 07 Submittal Requirements for Minor Plats A. Applications for minor plats shall require the following: n 1. An application form as specified in Section 9. 02. 02. W 2. A survey showing the following: w a. The location of all structures, and utilities above and underground ro including service lines to the remaining and proposed buildings) that exist